Solas Kawasaki 900 STX STS ZXI Xprop Impeller KF-SC-I-16-21
This 16-21 X-Prop impeller is designed for stock to limited applications on
Kawasaki 900 STS STX ZXI 96-02
X-Prop Stainless Steel Impeller - High Speed & Ultimate Performance
The SOLAS X prop gives you the most powerful propulsion in the water from an advanced design that incorporates a high compression hub and chambered blades. Enthusiasts looking for speed and acceleration from the novice to the professional, will be satisfied using this impeller. You can trust the harsh field testing of the X prop by Team SOLAS.
SOLAS has a wide range of propulsion designs from straight pitch impellers (like the Super
Camber series, X Prop, and Concord) to our newly developed Dynafly series. SOLAS
continually develops and improves its impellers.
SOLAS sponsored a great deal of professional racing teams including Chris Fischetti, Chris MacCluggage, Dustin Farthing, Dustin John Motzouris, Eric Malone, Jeff Jacobs, Karine Paturel, Lloyd Burlew, Nicholas Rius, Rick Quelch, Rick Roy, Tera Crismon, Tracy Lathwood, and many other well-known racers around the world in the past years. The outstanding success of SOLAS sponsored riders demonstrated the proven excellence of the SOLAS Impellers. The valuable design feedback from these world-class racers supports the creation of SOLAS perfect geometry in all kinds of PWC applications.
Impeller Accessories & Installation Guide
1.Remove and separate the whole jet pump from the PWC.
2.Remove the tail cone (or cap) from the stator.
3.Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench. Turning counter clockwise will loosen the impeller.
4.Visually inspect thread on shaft & impeller for debris or damage. Apply grease or anti-seize on the thread before installation.
5.Screw in the impeller by hand; be careful of the sharp edges of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.
6.Assemble the pump and put it back on the PWC.